spec no: dsal1006 rev no: v.1 date: aug/19/2010 page: 1 of 7 approved: wynec checked: allen liu drawn: y.h.wu erp: 1203008490 1.6x1.25mm bi-color smd chip led lamp attention observe precautions for handling electrostatic discharge sensitive devices part number: APTB1612SURKQWDF hyper red white features z 1.6mmx1.25mm smt led, 0.65mm thickness. z bi-color,low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. description the hyper red source color devices are made with al- gainp on gaas substrat e light emitting diode. the source color devices are made with ingan light emit- ting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3.the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.the device has a single mounting surface. the device must be mounted according to the specifications.
spec no: dsal1006 rev no: v.1 date: aug/19/2010 page: 2 of 7 approved: wynec checked: allen liu drawn: y.h.wu erp: 1203008490 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APTB1612SURKQWDF hyper red (algainp) yellow fluorescent 120 200 white (ingan) 120 220 120 parameter hyper red white units power dissipation 75 120 mw dc forward current 30 30 ma peak forward current [1] 185 150 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c electrical / optical characterist ics at ta=25c [surk] notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. symbol parameter device typ. max. units test conditions peak peak wavelength hyper red 650 nm i f =20ma d [1] dominant wavelength hyper red 630 nm i f =20ma ? 1/2 spectral line half-width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f [2] forward voltage hyper red 1.95 2.5 v i f =20ma i r reverse current hyper red 10 ua v r =5v electrical / optical characteristi cs at ta=25c [qb-d (white)] notes: 1. forward voltage: +/-0.1v. 2 : measurement tolerance of the chro maticity coordinates is 0.01. symbol parameter device typ. max. units test conditions v f [1] forward voltage white 3.3 4.0 v i f =20ma x [2] chromaticity coordinates white 0.31 y [2] 0.31 c capacitance white 100 pf v f =0v;f=1mhz i r reverse current white 50 ua v r = 5v
spec no: dsal1006 rev no: v.1 date: aug/19/2010 page: 3 of 7 approved: wynec checked: allen liu drawn: y.h.wu erp: 1203008490 APTB1612SURKQWDF hyper red
spec no: dsal1006 rev no: v.1 date: aug/19/2010 page: 4 of 7 approved: wynec checked: allen liu drawn: y.h.wu erp: 1203008490 white
spec no: dsal1006 rev no: v.1 date: aug/19/2010 page: 5 of 7 approved: wynec checked: allen liu drawn: y.h.wu erp: 1203008490 white APTB1612SURKQWDF 0.20 0.25 0.30 0.35 0.40 0.20 0.25 0.30 0.35 0.40 x y a2 a0 b1 b2 c0 white cie x y x y x y a2 0.263 0.213 a0 0.282 0.245 b2 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 b1 0.313 0.296 c0 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 notes: shipment may contain more than one chromaticity regions. orders for single chromaticity region are generally not accepted. measurement tolerance of the chro maticity coordinates is 0.01.
spec no: dsal1006 rev no: v.1 date: aug/19/2010 page: 6 of 7 approved: wynec checked: allen liu drawn: y.h.wu erp: 1203008490 APTB1612SURKQWDF reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsal1006 rev no: v.1 date: aug/19/2010 page: 7 of 7 approved: wynec checked: allen liu drawn: y.h.wu erp: 1203008490 packing & label specifications APTB1612SURKQWDF
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: kingbright: ? APTB1612SURKQWDF
|
